SA-100P(2) / 1000P(2)

IN-LINE Oil in Water Analyser

  • Ultrasonics
  • Fluorescence
  • Spectroscopy

The SA-100P and the SA-100P2 are respectively a single and dual in-line probe Oil in Water analysers suitable for non-hazardous areas; they both use fluorescence to provide continuous accurate measurements of oil concentrations in water. The additional probe on the SA-100P2 allows monitoring of two process points simultaneously with dual readings displayed on the analyser. Reliable real-time data enables operators to take accurate measurements and to improve efficiency enabling cost reductions. The SA Series is ideally suited for refineries, marine, industrial and general waste-water monitoring. In addition to the standard probe features the 1000 models offer spectral analysis.

 

 

Features

  • Adaptive ultrasonic cleaning.
  • Laser Induce Fluorescence (LIF).
  • Remote management and diagnostics.
  • Easy to install.
  • Spectrometer (with SA-100P model)
  • Dual probe (with SA-100P2/ 1000P2)
  • For the option of hot insertion/ extraction, an extraction tool and gear box is recommended for pressures in the range 3-5 barg. For pressures above 6 barg a gear box is essential for hot insertion/ extraction.
  • Digital input and output.

Benefits

  • No user required maintenance.
  • Consistent accurate performance.
  • No sample conditioning system required. Inserted directly in process pipe.
  • Accurate OIW measurements over the laser lifetime of 18 months. No recalibration required and no degradation of signal over the period of 18 months.
  • During process shut down, the analyser can be turned to standby mode through remote digital input. All signals are accessible remotely through Modbus/ Ethernet connectivity.
  • Spectrum of light wavelength is monitored and helps to find any process surge due to change in process/ chemical addition. Oil type switching is also feasible.
  • Simultaneous display of two stream measurements in one device. Effective means of monitoring performance of separation equipment both inlet and outlet.
  • With double block and bleed valve, probe can be inserted/ removed without process shut down.

The SA-100P(2) / 1000P(2) uses the following technologies

Ultrasonics

Ensuring no routine maintenance of our Oil in Water analysers.

Find Out More

Fluorescence

Providing unrivalled accuracy and reliability of Oil in Water concentration

Find Out More

Spectroscopy

Using spectral analysis to detect changes in water composition.

Find Out More

You can find a full technical specification for the SA-100P(2) / 1000P(2) in the datasheet.

View Datasheet